Connect the SATA Cables and Power Cables to the Olimex Card

Equipment Needed

• (Red) SATA cable
• Power cable
• A20 Olimex card

The cables must be connected correctly; forcing ends into the slots could damage the plugs.

Assembly

1. Run the cable under the card, as seen in the photo.
   

2. Find the white connector located under the already welded switch. Connect the power cable.

   The connector is designed to allow for correct insertion only. Trying to force the plug in the wrong way can damage it.

   

3. Follow the same steps for the red SATA connector.

   The connector is designed to allow for correct insertion only. Trying to force the plug in the wrong way can damage it.

   

4. View of the power cable and SATA cable correctly connected to the card.