Fasten the Olimex Card to the F2 deck

 Equipment Needed

• A20 Olimex card
• F2 deck
• 2 white plastic screws (M 3x10)

 Assembly

1. Place the notches of the Olimex card between the 15-mm standoffs with the heat dissipater facing the disk.
   

   Because the standoffs are six-sided, you may have trouble positioning the card on the F2 deck. Use pliers to rotate the standoffs until they are parallel to the notches on the cards.

   

2. Screw the 2 white plastic screws into the two holes located near the SD card slot to fasten the card to the F2 deck.
   
3. Finished view of card fastened onto F2 deck.