Attach 4 20-mm Standoffs to the F2 Deck
Equipment Needed
- F2 deck
- 4 M3x10 metal flat screws (ø3 mm, 10 mm long)
- 4 threaded standoffs (HEX, NYLON 6 FEMALE, 20 mm, M3)
Assembly
- Insert the metal screw from the bottom of the F2 board, then place it on the upper part the standoff.
- Screw the standoff onto the metal screw.
- Repeat the same steps for the 3 other standoffs. Once completed, it should look like this:
