Weld Wires to the Switch

 Equipment Needed

• Soldering iron
• Switch
• Front of casing
• Olimex card, its 2 red wires and black wire

 Assembly

1. Gently bend the (-) lug towards the C1 lug until they touch. This allows the grounds to be connected.
   
2. Weld the (-) lug to the C1 lug.
   
3. Weld the black wire onto the now connected (-) and C1 lugs.
   
4. Locate the wire from the GPIO 3 (the longer, 15 cm, red wire) and weld it to the (+) lug.
5. Locate the second red wire from the switch (the 10 cm red wire) and weld it to the NO1 lug (normally open 1)